Product ID:M-LINE 450-20S SOLDER
MSDS Date:08/24/1995
FSC:3439
NIIN:00N085297
MSDS Number: CHBKC

MEASUREMENTS GROUP INC

RALEIGH, NC 27611
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 919-365-3800

Preparer: R.L. FRIDLEY

Cage: 88952

MEASUREMENTS GROUP INC

WENDELL, NC 27591 US

Telephone: 919-365-3800

Cage: 88952

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 95%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3

ANTIMONY (SARA 313) (CERCLA)

CAS: 7440-36-0

RTECS: CC4025000

Fraction By Weight: 5%

OSHA PEL 0.5 MG/M3

ACGIH TLV: 0.5 MG/M3 (SB)

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE KNOWN.
Medical Cond Aggravated by Exposure:PRE-EXISTING CONDITIONS OF THE
LUNGS, DISEASES OF THE BLOOD & BLOOD-FORMING ORGANS, KIDNEYS,
NERVES & POSSIBLY REPRODUCTIVE SYSTEM.

First Aid:INHAL:REMOVE TO FRESH AIR. EYES:FLUSH IMMEDIATELY W/COOL
WATER FOR AT LEAST 15 MINUTES. SKIN:FLUSH IMMEDIATELY W/COOL WATER.
INGEST:SEEK MEDICAL ATTENTION.

Extinguishing Media:APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:MELTED SOLDER WILL SOLIDIFY ON COOLING & CAN
BE SCRAPED UP. USE CAUTION TO AVOID BREATHING FUMES IF A GAS TORCH
IS USED TO CUT UP LARGE PIECES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE AWAY FROM SOURCES OF SULFUR.
AVOID BREATHING FUMES DURING SOLDERING.
Other Precautions:NOT USUALLY REQUIRED.

Respiratory Protection:USUALLY NOT REQUIRED. WHEN VENTILATION IS NOT
SUFFICIENT TO REMOVE FUMES FROM BREATHING ZONE, A NIOSH APPROVED
CARTRIDGE TYPE RESPIRATOR SHOULD BE WORN.
Ventilation:LOCAL EXHAUST &/OR MECHANICAL: KEEP BELOW TLV.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS(SUPDAT)
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE.
Supplemental Safety and Health
EYE PROT:& FULL LENGTH FACESHIELD .

Spec Gravity:>1 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVER-GRAY METAL IN WIRE SHAPE.

Stability Indicator/Materials to Avoid:YES
STRONG ACID OXIDIZERS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:NONE.

Waste Disposal Methods:SOLDER IS RECLAIMABLE. DISPOSAL SHOULD BE I/A/W
LOCAL, STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.